Filter By:
- Parts & Accessories (11)
- Pedals (24)
- Show More Brands
- Show Fewer Brands
Pedals

$14.99
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes.
- Sold in pairs

$150.00 - $179.99
Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity.
Specifications:
- spindle material: forged scm 435 chromoly steel
- body material: forged 6061-T6
- inner bearing type: igus LL-glide bearing
- outer bearing type: igus LL-glide bearing
- footprint: 100mm x 100mm (small) / 114mm x 111mm (large)
- adjustable pins: 10 per side
- minimal profile: 11mm-13mm thin
- stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
- stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu)
- weight: 375g per pair (small) / 405g per pair (large)

$59.99
Size specific composite platform pedal with optimal shoe/pedal interface.
- Optimal surface area
- Minimal profile 13mm thin
- 9 hex traction pins per side
- Premium bearings & seal system
- Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu)
- Body Material: Composite
- Footprint: 111mm x 114mm
- Hex Traction pins: 9 per side (mounted from back)
- Inner Bearing type: Igus LL-glide bearing
- Outer Bearing type: Enduro cartridge bearing
- Spindle Material: Forged scm 435 chromoly steel
- Warranty: 5 years
- Weight: 329g per pair

$59.99
Size specific composite platform pedal with optimal shoe/pedal interface.
- Optimal surface area
- Minimal profile 13mm thin
- 9 hex traction pins per side
- Premium bearings & seal system
- Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu)
- Body Material: Composite
- Footprint: 111mm x 114mm
- Hex Traction Pins: 9 per side (mounted from back)
- Inner Bearing Type: Igus LL-glide bearing
- Outer Bearing Type: Enduro cartridge bearing
- Shoe Size: 10-15 (us) // 43-49 (eu)
- Spindle Material: Forged scm 435 chromoly steel
- Warranty: 5 years
- Weight: 329g per pair

$59.99
Size specific composite platform pedal with optimal shoe/pedal interface.
- Optimal surface area
- Minimal profile 13mm thin
- 9 hex traction pins per side
- Premium bearings & seal system
- Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
- Body Material: Composite
- Footprint: 111mm x 114mm
- Hex Traction Pins: 9 per side (mounted from back)
- Inner Bearing Type: Igus LL-glide bearing
- Outer Bearing Type: Enduro cartridge bearing
- Shoe Size: US 5-10 // EU 37-43
- Spindle Material: Forged scm 435 chromoly steel
- Warranty: 5 years
- Weight: 329g per pair

$59.99
Size specific composite platform pedal with optimal shoe/pedal interface.
- Optimal surface area
- Minimal profile 13mm thin
- 9 hex traction pins per side
- Premium bearings & seal system
- Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
- Body Material: Composite
- Footprint: 100mm x 100mm
- Hex Traction Pins: 9 per side (mounted from back)
- Inner Bearing Type: Igus LL-glide bearing
- Outer Bearing Type: Enduro cartridge bearing
- Shoe Size: US 5-10 // EU 37-43
- Spindle Material: Forged scm 435 chromoly steel
- Warranty: 5 years
- Weight: 299g per pair

$39.99
The XPro & Xpresso cleats have been developed for the TIME XPro & Xpresso road bike pedal range. They allow angular and lateral freedom in order to respect the natural movements of your legs and joints. You can also adjust the Q-factor (by switching the cleats) in order to optimize performance, following 3 points: security, ergonomics, and performance. The Bi-material brings more durability when walking with the cleats. These cleats are the stock cleats included with all XPro & Xpresso pedals.

$44.99 - $49.99
These extremely durable pedals are constructed of a nylon composite thermoplastic body and feature eight removable steel M3 pins per side for superior grip.
- One sealed bearing is paired with a long-lasting DU sleeve in each pedal for an impressively smooth interface
- Chromoly steel spindle for strength
- Spindle size: 9/16-inch

$29.99
One-piece translucent resin body pedals with a chromoly spindle.
- Molded pin design
- Spindle size: 9/16-inch
- Loose ball bearings
- 375g/pair

$22.00 - $25.00
The MADE by LOOK KEO standard is recognized in the cycling world for its minimal weight and compact design of the cleat and pedal combo. Of course, compatible with all pedals on the market, their memory positioner is a major advantage when changing your cleats. Their principle and use are the same as the DELTA cleat standard; engagement and disengagement remain efficient and reassuring.
- Use: Road
- Material: Polyamide + PTFE
- Lateral adjustment: 4mm
- Longitudinal adjustment: 12mm
- Weight (pair + fasteners): 68g

$499.99
Crank Brothers' Eggbeater pedals are 4-sided, making them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and they feature 6-degrees of knee-friendly float. The Eggbeater 11s boast titanium axles, wings, and bodies, stainless-steel springs, and inner needle bearings. Crank Brothers has also made the Eggbeater internals water-tight for excellent durability and consistently smooth pedaling.

$65.00 - $70.00
Discover the world of clipless pedals with the KEO CLASSIC 3. The easily adjustable tension makes clipping in and out smooth and simple, with the ability to increase tension to fully appreciate the pedal and all its advantages.
- Technology: Spring
- Cleats: Keo Grip
- Retention: 8 to 12
- Body: Composite
- Spindle: Chromoly
- Platform Material: Composite
- Platform area: 400mm²
- Platform width: 50mm
- Q Factor: 53mm
- Stack height + cleats: 17.8mm (11.5 + 6.3mm)
- Weight (pedal): 140g
- Weight (pair + cleats): 350g

$34.99
- Forged aluminum body
- Chromoly spindle
- Non-slip studs
- Toe clip compatible
- 529g per pair (9/16-inch)

$50.00 - $60.00
Shimano's M520s are affordable clipless pedals that are easy to enter and exit, and built to last. They boast dual-sided Shimano SPD bindings, which make them perfect for mountain bikers or roadies who prefer wearing walkable shoes with recessed cleats. The bindings are adjustable for dialing in the perfect entry and exit tension, and they have an open, mud-shedding design that prevents clogging. Chromoly axles and sealed bearings add tons of durability.
- 380 grams (pair)

$80.00 - $84.99
Get rad without getting broke. This Multi-Purpose Flat Pedal from Shimano has a wide platform and adjustable pin height to dial in the perfect amount of grip for your preference and riding conditions.
- 3 different pin height settings to match different type of riding
- 9 pins per platform
- Highest setting is+5 mm higher than PD-MX80's pins
- Weight: 533g

$29.99 - $39.99
- Durable nylon+fiber body
- Heat-treated chromoly spindle
- Molded pins
- Loose ball bearings
- 375g/pair

$17.10 - $29.50
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.

$29.99
The Bontrager City Pedal Set delivers comfortable foot support and reliable traction to keep you confidently connected to your bike. It features reflective edges on the front and rear to add visibility in low-light conditions, and a strong, durable, and easily serviceable chromoly axle to keep you rolling smoothly ride after ride.
- Nylon concave body supports and stabilizes foot while pedaling
- Anti-slip texture for traction and confidence
- Front and rear reflective panels add visibility in low-light conditions
- Durable chromoly spindle with long- lasting, serviceable bearings
- Installs with 6mm hex key or flat 15mm pedal wrench

$27.00 - $30.00
The KEO GRIP cleats closely resemble the KEO CLEAT model, yet they boast the added feature of a TPU layer on the shoe side which prevents the risk of cleats sliding on carbon soles. Their anti-slip surface on the pedal side offers extra safety and stability when walking.
- Use: Road
- Material: Polyamide + TPU
- Lateral adjustment: 4mm
- Longitudinal adjustment: 9mm
- Weight (pair + fasteners): 68g

$59.99 - $79.99
Crank Brothers' Eggbeaters are 4-sided, which makes them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and these pedals feature 6-degrees of knee-friendly float. The Eggbeater 1s feature chromoly axles, stainless-steel springs, and steel bodies.

$22.00
The DELTA standard requires a rotational movement of the foot toward the outside or inside for disengagement. This function improves cyclist's safety; no body or bearing prevents disengagement toward the inside. Compatible with non-KEO LOOK pedals, their contact area is wide for optimal comfort. They also feature a memory positioner to aid when changing cleats.
- Use: Road & Indoor Bike
- Material: Polyacetal + PTFE
- Lateral adjustment: 4mm
- Longitudinal adjustment: 12mm
- Weight (pair + fasteners): 75g

$649.99
Rally RS100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding.
- Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes.
- Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally RS100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately).
- Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite Shimano SPD-SL cleats.
- Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately).
- Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life.
Specs:
- Battery type: LR44/SR44 (x4) or CR1/3N (x2)
- Battery life: up to 120 hours
- Maximum rider weight: 105kg
- Accuracy: +/- 1%
- Field calibration
- Adjustable release tension
- Measurement location: spindle
- Communication: ANT+ and BLUETOOTH
- Weight: 328g
- Water resistance: IPX7
- Cleat type: SPD-SL
- Q-factor: 53mm (55mm with provided 2mm washer)
- Stack height: 12.2mm
In the Box:
- Rally RS100 pedals
- Cleat hardware
- 55mm Q-factor washers
- Documentation

$8.99 - $14.99
- High impact Resin multi-use body with integrated cage
- Externally sealed ball bearing system
- 100mm x 82mm platform
- Weight: 316g pair (9/16")

$125.00
- Large pedal platform
- Lower platform height for pedaling stability
- Robust retention claws provide smooth engagement and release
- Customize the entry and release tension settings
- Strong, durable chrome-moly spindle with 8 mm hex wrench mount
- Sealed mechanism
- SM-SH51 Cleat included
- 1.0 mm cleat spacer included
- Binding: Dual sided
- Cartridge axle
- Cleat retention adjuster
- Average weight: 342g
- Optional cleat: SM-SH56
- Pedal Type: Off-Road (SPD)

$22.99 - $34.99
Shimano's SPD-SL cleats are perfect for all your SPD-SL-compatible pedals. Available in three models to suit your ergonomic needs, with fixed/0-degree, 2-degree, and 6-degree options. These cleats come as a pair and include all required mounting hardware. They are compatible with three-bolt cycling shoes.
- 0° Float/fixed type = SM-SH10
- 2° Float/front center pivoting type = SM-SH12
- 6° Float = SM-SH11

$24.99
Wellgo Clipless Cleats for SPD Style pedals.
- Four degrees of float
- Includes four cleat mounting bolts, two cleat washers, and two cleats
- 98A cleat is Shimano SH51 compatible
- Not fully compatible with pedal types that use Shimano multi-release cleats
- Packed in bag, not for retail display

$125.00
The KEO 2 MAX pedal is an excellent example of LOOK's design experience. With its wide contact area and composite body, it offers state-of-the-art technology for full power transfer, in an affordable package.
- Technology: Spring
- Cleats: Keo Grip
- Retention: 8 to 12
- Body: Composite
- Spindle: Chromoly+
- Platform material: Stainless Steel
- Platform area: 500mm²
- Platform width: 50mm
- Q Factor: 53mm
- Stack height + cleats: 17.3mm (11 + 6.3mm)
- Weight (pedal): 130g
- Weight (pair + cleats): 328g

$79.99 - $99.99
Size-specific enthusiast-level platform pedal provides optimal shoe/pedal interface.
Details
- Optimal surface area
- Minimal profile 16mm thin
- 10 adjustable 8mm pins per side for grip
- 10mm pins available for purchase here
- Premium bearings & seal system
- Stamp small recommended for shoe sizes: 5-10 (US) // 37-43 (EU)
- Stamp large recommended for shoe sizes: 10-15 (US) // 43-49 (EU)
- Serviceable, pedal refresh kit available
Specs
- Adjustable pins: 10 per side
- Body Material: A380 Aluminum
- Endcap: T15
- Footprint: 100mm x 100mm (Small), 114mm x 111mm (Large)
- Inner Bearing Type: Igus Bearing
- Max Rider Weight: No restriction
- Outer Bearing Type: Double Cartridge Bearing
- Shoe Size: US 5-10 // EU 37-43 (Small), US 10-15 // EU 43-49 (Large)
- Spindle Material: Forged SCM 415 Chromoly Steel
- Warranty: 5 years
- Weight: 439g per pair (Small), 494g per pair (Large)

$29.99
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability.
- SPD compatibility
- Weight (pair): 30g
- Float: 6 degrees
- Release angle: 15 or 20 degrees

$130.00
- Wide pedal-to-shoe contact
- Lower platform height for pedaling stability
- Integrated cage increases stability and control when not clipped in and protects binding mechanism against impacts
- Robust retention claws provide smooth engagement and release
- Customize the entry and release tension settings
- Strong, durable chrome-molly spindle with 8 mm hex wrench mount
- Sealed mechanism
- 1.0 mm cleat spacer included
- Binding Dual sided
- SM-SH51 Cleat included
- Cleat retention adjuster
- Integrated cage
- Cartridge axle
- Average weight: 438g
- Optional cleat: SM-SH56
- Pedal Type: Off-Road (SPD)
Page 1 of 2
Next page